This Mavic tablet mount is born to supporting DJI Mavic Air, Mavic Pro, Mavic Pro Platinum, DJI Spark remote controller.
Aviation Aluminum-Alloy trestle table, foldable plastic trestle, it is light(0.5lb.),small but rock solid.
Exactly suitable for 4-12 inches phone & tablet supporting for DJI Mavic or DJI Spark
1. iPad Air2, iPhone 6, 7, 8, X, mini4, iPad Pro 9.7
2. Google Nexus7, Lenovo Tab 2 A10, Galaxy Tab S2 (9.7in.), Galaxy Note5
3. Other phones and tablets between 4-12 inches
1. The tablet holder can rotate 360 degree, so the tablet can be horizontal or vertical easily.
2. It is foldable, iphone size, very convenient to carry out with other DJI accessaries.
3. The joint can be 45 degree up and down to provide a wide angle view.
Assembly: follow the assembly picture above
1. Make the two trestles 90 degree up and together
2. Put the screw into the trestles
3. Set the holder to the trestle extreme and tighten the screw
4. Rotate the holder based on your need
Aviation Aluminum-Alloy remote holder, light but rock solid designed, and be borned to supporting DJI Mavic or DJI Spark remote controller.
360 degree rotate to support 4-12 inches phone & tablet with Mavic or Spark ,45 degrees to up and down to provide a wide angle view
Foldable and iphone sized. Light enough (only 0.5lb.) to be carried out with all other DJI Mavic or DJI Spark pro.
Super easy to operate, assemble and disassemble. Pls follow the picture steps only
It is perfectly suitable for DJI Mavic and DJI Spark, too.